The automobile is subject to the excessive air and load requirements; the structural parts and system components must be compressed after the assembly. The heat resistance is very high for impermeability demand for the foreign effects in mechanical and chemical form. Ercan Polymer Application provides different automobile application more than 350 about the impermeability, adhesiveness, foam mould and casting from 3.stop lamp on the door module to parking sensors.
The function controlled electronic components must be protected by body seals against dust and moisture with the sealing in direct structure part. Polyurethane cast resins depending on two component room temperature of Ercan Polymer Application, may perform this duty in perfect form. Ercan Polymer Application has accurate solution for each application and each duty in foam body or electronic structure group coatings for electrical panels.
Filter systems have extreme duties which must be fulfilled. In one side, the polluted air flows and on the other side, the re-cleaned air flows. This means that the dust absorber filter must have long-life as well as the automobile air filter for impermeability. Ercan Polymer Application offers foam impermeability, adhesion and casting solutions to the leading producers of the filters thus filer keeps its promise and adheres by being gasket.
Strict rules are valid in the improvement of room hygiene in the infection protection rules. Ercan Polymer application develops anti-microbial foam seal preventing the microorganisms hazardous to health stick to the seals of air conditioner and ventilation facilities with special additives.
When installed in outdoor, photovoltaic and solar thermal facilities expose to the outdoor effects as defenselessly. Ercan Polymer Application special impermeability solutions do not allow dust-moisture and hazardous environment. Ercan Polymer Application offers solutions which recognize these high conditions together with polyurethane casting liquid foam seals. Thus, the functionality of the facilities remains in secure form.
The excellent insulation stations of streets, humid rooms or indicator lightings are seen entirely in each corner. Thus, Ercan Polymer Application is the first choice of leading lighting manufacturers with the most demand in IP protection classes of the products. In addition, Ercan Polymer Application offers UL-certified products for the fixtures which are resistant to explosion or ATEX-PTB.
Ercan Polymer Application offer excellent protection in falling and impact status and against leakage and contamination for black sheet, white sheet, steel and plastic packaging. As well as the basic impermeability foam, Ercan Polymer Application produces polyurethane based foam seals which their packaging is certified by independent institutions.
Dry and clean control panels are essential for operational power distribution. Ercan Polymer Application fulfills the highest IP protection classes for external usage of control panel seals in excessive air conditions. In addition, special product ranges are resistant to flame and explosion according to NEMA-ATEX and UL norms.
The thixotropic (in pasty form) impermeability systems which form the seal body, are preferred here in accordance with the viscosity degree showing height from 2,5 to 1:1,5 and width rate.
Mostly, fluid impermeability systems which equalize themselves are used in connection field. In such case, a jointless closed impermeability may be provided.
The thixotropic (in pasty form) impermeability systems which form the seal body, are preferred here in accordance with the viscosity degree showing height from 2,5 to 1:1,5 and width rate. This application is possible from extreme inclined surfaces to vertical surfaces.
The thixotropic (in pasty form) impermeability systems are mostly preferred here. The impermeability demand is possible in extreme slopes.